How to Replace a Camelbak Bite Valve - Micro Advice Video Series

[youtube height="HEIGHT" width="WIDTH"]http://www.youtube.com/watch?v=E_79CnYyJ1E&list=PL47fQZP0orDFX_bHNZ85RH8BwN7pmQfn-&index=8[/youtube]

VIDEO TRANSCRIPT:

Hi guys. I'm Shaun from simplyhike.co.uk. Today I'm going to be talking to you about how to replace the bite valve on your Camelbak. It's as simple as pulling the valve off, and then putting the bite valve on. Right. So, there's nothing wrong with this Camelbak, so what we're going to do which is quite literally, we're going to put it back together.

The only thing that's a wee bit fiddly is obviously getting the new bite valve positioned back on there. Obviously it needs to keep it nice and tight and watertight so obviously water is not coming at the end. You've got to roll it on, so the first time you do it, it can take a while. But it's a simple as that and obviously with the rivets as well, it holds it in there as well nice and tight. There we go. It's as simple as that.

All right guys, I hope that's helped you out for adjusting your Camelbak. For more information, please visit us at simplyhike.co.uk and don't forget to check out more of our micro videos.